Petporte Microchip Smart Cat Flap [790]

Features:

4-Way Locking System
For cats up to 7kg
Uses your cat's standard microchip for identity
Automatically locks after your cat enters or exits
Automatically unlocks as your cat approaches
Can be programmed with up to 25 microchips (up to 25 cats !)
Maximum pet shoulder width 145mm
External power operated
1 year warranty

Product Status: available

Was : $279.00

Price: $269.00

Features:

4-Way Locking System
Transparent, rigid plastic flap
For cats up to 7kg
Only allows your cat Access
Automatically locks after your cat enters or exits
Automatically unlocks as your cat approaches
Can be programmed with up to 25 microchips
Works with standard FDX-B microchips
Maximum pet shoulder width 145mm
Overall size: 232 mm x 232 mm
Cut out size: 169 mm x 169 mm
Glass cut-out size: 212 mm diameter
Fits wooden/timber doors, brick walls, PVC/uPVC doors, glass/windows
External power operated
1 year warranty

The Petporte smart microchip cat flap is designed for your cats easy access to the outside world whilst keeping other unwanted animals out of your house. The Petporte smart cat flap does not require your cats to a receiver collar on. It reads the unique ID stored on your cat’s microchip that your vet has implanted. Whenever your cat passes under the porch, the cat flap scans the unique number and, if that number matches the number already programmed into the flap, it will allow the cat to walk through.

Programming Cats into the Petporte smart flap

The Petporte smart flap is initially supplied unprogrammed, when it is first powered both the green and red lights will flash to indicate that there are no ID programmed into the unit. The door locks will be open to allow free access for any animals. When programming the Petporte smart flap with an animal for the fi rst time or if you exceed the programming time, ensure that your pet is nearby as you have 30 seconds in which to introduce the animal to the scanner (porch). Press and hold the Green Button for about 10 seconds until the green light and release the Green button and a beeping will be set off. You now have 30 seconds to pass the cat underneath the porch. Microchips are normally implanted between the shoulder blades of the cat which means that part of the animal needs to be under the porch area in order to program the ID into the smart cat flap. Once the microchip has been successfully scanned, the Petporte smart flap will beep three times. The green light will stop fl ashing, and the green lock will come up to its locked position. If this procedure fails the first time or if you exceed the programming time (30 seconds), simply repeat the process.You will need to program the unit with each of your cats by following the same steps. You can program up to 25 cats into this cat flap.

Function Button	Activation Mode	Button Function
Normal Mode	This is the default mode on powering up and requires no button activation.
Night Mode (Timer Mode)	Press the Red Button for less than 2 seconds	The red light will illuminate. In Night Mode: During the hours of darkness, the green light will illuminate. The unit will not allow the cat to exit. At dawn, the green light will extinguish and the lock opens and the cat can go outside again until dusk. In Timer Mode: The unit will Lock and Unlock at specifi c programmed times of day.
Vet Mode	Press the Red Button for more than 2 seconds	The red light will then fl ash and the unit will not allow any cats to go out.
Program Entry	Press and hold the Green Button for more than 10 seconds	The green light will flash and you then have 30 seconds in which to program your cat by passing the animal under the porch.
Extended Modes	Press and hold both the Red and Green Buttons for more than 2 seconds	The unit will emit a long beep indicating that the extended modes are now available and the green light will be lit.
Key Pad Lock	Press and hold the Red Button for more than 30 seconds	The unit will emit a series of beeps indicating the unit is now locked.
Erase Mode	Press and hold both the Red and Green Buttons for more than 30 seconds	The unit will emit a series of short beeps followed by a long beep. Both lights should now be fl ashing. Note: Once the unit’s memory has been erased, it will have to be re-programmed before further use!
Reset to Normal Mode	Press and hold the Green Button for more than 30 seconds	The unit will emit a series of short beeps followed by a long beep. Both lights should extinguish. Hold both buttons down simultaneously for more than 30 seconds and UPON RELEASE the unit emits a long beep.